The Hidden Electrical Environment in Your Home: Dr. Daniel Pompa on EMFs, Dirty Electricity and Cellular Health

Exploring EMFs and Cellular Health with B.D. Erickson II and Dr. Daniel Pompa

You can eat clean, exercise, optimize your sleep, get outside and build an entire lifestyle around wellness—but what about the environment inside your home?

In this special episode of The Current Truth Podcast, B.D. Erickson II sits down with Dr. Daniel Pompa after a full day of testing and evaluating the electrical environment inside Dr. Pompa’s home. The team tested more than 80 outlets, evaluated electrical panels and circuits, measured EMFs and dirty electricity, and investigated areas where unexpected electrical exposure was occurring.

What they found surprised even Dr. Pompa. Despite living in a beautiful, newer home, the testing uncovered electrical issues and elevated readings in places his family spends hours every day—including the bedroom.

A Healthy Home Is More Than What You Can See

Dr. Pompa has spent decades teaching about cellular health, environmental toxins and the factors that can interfere with how the body functions. But this assessment focused on something homeowners rarely see: their electrical environment.

“People don’t realize that this type of energy that we’re talking about disrupts the cell.”

For Dr. Pompa, the conversation around EMFs and dirty electricity fits into a much larger philosophy of reducing environmental stressors. He explains that someone can focus intensely on nutrition, hydration, grounding, sunlight and other healthy habits while potentially overlooking what is happening electrically inside the home.

That is what made testing so important. Instead of assuming the home was electrically clean because it was newer and well built, the team measured it.

What the Electrical Testing Found

Throughout the day, B.D. and the SATIC team tested more than 80 outlets and inspected the home's electrical panels circuit by circuit. While most outlets produced reasonable readings, several areas stood out.

The team looked for wiring issues, equipment contributing electrical noise, improper connections and other conditions that could affect the home's electrical environment. One downstairs light produced an especially high meter reading, demonstrating how something that appears to operate normally can still look very different when measured electrically.

“If the outlet works, the outlet’s fine to 99% of it. I plug something in, the device still works.”

That is one of the central lessons of the episode: electrical problems aren't always obvious. The lights can turn on, appliances can operate normally and a home can appear perfectly functional while testing reveals another story.

The Bedroom Reading That Got Dr. Pompa’s Attention

One of the most compelling discoveries occurred in the bedroom.

Dr. Pompa explained that his wife had repeatedly noticed she didn't sleep as well at home as she did in other places. Testing near the bed revealed an elevated electrical field associated with wiring and outlets in the wall.

The team installed a SATIC FieldShield behind the bed, hidden from view, and then measured the area again.

“You brought it down to zero.”

The before-and-after measurement immediately caught Dr. Pompa's attention. Rather than simply discussing an invisible environmental factor, they were able to identify a specific area, address it and measure the change.

For homeowners interested in creating healthier bedrooms and living environments, it raises an important question: what are you actually being exposed to in the places where you spend the most time?

Dirty Electricity Can Be Measured

Throughout the assessment, the team used professional testing equipment including oscilloscopes, Fluke meters, EMI meters and EMF meters to evaluate different aspects of the home's electrical environment.

SATIC's approach is based on a simple principle: don't guess—measure.

Dirty electricity refers broadly to unwanted high-frequency electrical noise and distortion riding on electrical wiring. Modern homes contain an increasing number of electronic devices and switching technologies that can contribute to this electrical environment.

After testing Dr. Pompa's home, the team installed SATIC power-conditioning technology at the electrical panels and demonstrated measurable before-and-after changes.

“I saw that way up here and then you put this on and now it’s way down here.”

For Dr. Pompa, seeing the measurements was particularly meaningful because it turned an invisible issue into something tangible.

The Surprising Problem With Grounding

The episode also uncovered an unexpected issue involving grounding.

Dr. Pompa had previously experimented with a grounding mat but found that he didn't sleep well while using it. During the assessment, the SATIC team discovered measurable current on the home's grounding system.

B.D. explains that a basic outlet tester can indicate whether an outlet is wired with a ground, but that doesn't necessarily determine whether unwanted current is present on that grounding system.

“Just because 99% of your outlets were grounded testing grounded properly didn’t mean that you didn’t have an amp of current on each panel.”

The takeaway wasn't that grounding itself is inherently problematic. Instead, the conversation emphasizes the importance of understanding and testing the electrical environment you're connecting yourself to.

Solar, Dirty Electricity and the Modern Home

Before wrapping up, Dr. Pompa raises another important topic: solar.

Solar installations rely on inverters and power electronics to convert and manage electricity, making power quality an increasingly important consideration for modern homes. Dr. Pompa specifically encourages homeowners with solar to pay attention to the electrical environment created by their systems.

This is an area where SATIC Shield's whole-home power-conditioning technology is particularly relevant. As homes incorporate solar, batteries, EV chargers, smart appliances and other electronics, generating energy is only part of the equation.

The next question becomes: what is the quality of the electricity moving through the home?

Building a Truly Healthy Home

The biggest takeaway from this episode is that a healthy home isn't defined by one product or one wellness practice.

Indoor air quality matters. Mold matters. Water quality matters. Nutrition and lifestyle matter. And for B.D. and Dr. Pompa, understanding the electrical environment belongs in that conversation as well.

“We’re doing so many things in our life… Let’s not stop or miss one accidentally. Let’s get them all.”

Even Dr. Pompa's newer, well-built home contained issues that weren't apparent until specialists started testing. That doesn't mean every home has the same problems, but it does demonstrate why measurement can be more useful than assumptions.

Final Thoughts: Test, Measure and Understand Your Environment

You can't see dirty electricity or electromagnetic fields with your eyes. That makes it easy to overlook them when thinking about creating a healthier home.

This episode of The Current Truth demonstrates a different approach: test the environment, identify potential problems, make targeted changes and then measure again.

For Dr. Pompa, the day was ultimately about learning what was happening inside his own home and addressing issues his family couldn't see.

“I learned a lot today, man. More importantly, we solved some big issues.”

Watch the full episode of The Current Truth Podcast to follow B.D. Erickson II and Dr. Daniel Pompa through the assessment and see what the team discovered.

To learn more about dirty electricity, EMF testing, FieldShield and whole-home power conditioning, visit www.saticshield.com.